Airbrushing has many advantages that different painting methods cannot offer. With the airbrush approach, for instance, you may create extraordinarily fine, infinite coloration transitions and shades. This lets you create exceptionally realistic looking paintings.
In addition, giant areas will be quickly covered with paint. The paint is applied particularly thinly and evenly.

The airbrush technique can be utilized on almost all surfaces. From paper, metal, and plastic to textiles, skin, and meals - every surface can be decorated with an airbrush. Airbrushes, due to this fact, can be used in nearly all areas of art.

With an airbrush gun, water and solvent-primarily based paints, as well as varnishes, may be used. Meanwhile, paint producers also create specialized paints for various airbrush uses. Airbrush make-up, meals coloring, or special textile colors are also available.

The Airbrush Gun
In case you would like to buy your first airbrush gun, you will be confronted with a number of phrases that must be understood before you get started. Basically, there are types of airbrush guns. They work based on the identical precept (airflow atomizes paint) but differ slightly in handling:

Within the single-action version, the quantity of paint is adjusted and fixed by a wheel. During the spraying process, you'll be able to regulate the air pressure and thus the air quantity with a lever/knob. This airbrush gun is suitable for easy work.
The more common variant is a double-motion airbrush gun. This additionally has only one lever, however this one also regulates the air pressure/quantity and paint amount. The double-action airbrush gun requires, resulting from this "double lever perform" a little more apply in handling, however is suitable for all imaginable creative requirements.

Airbrush Compressor
In principle, any compressor that can be regulated in a range between 1.5 and 2.5 bar can be utilized to operate an airbrush gun. In this respect, a reasonable or present DIY store compressor can actually be used on your first attempts.

Sooner or later, nonetheless, the purchase of a specialized airbrush compressor is worthwhile. This has some advantages over the DIY store model by way of quantity and size. In addition, an airbrush compressor has a number of things which are lacking from the same old DIY compressor. We consider a water separator, pressure regulator, and an air tank to be very helpful to ensure hassle-free airbrush work.

Water Separator
The air loses its ability to hold moisture via compression. This escaping water may be expelled with the compressed air in a traditional compressor. If water is forced by way of the airbrush gun with the air stream, ugly paint blobs seem on the artwork. A compressor designed for airbrushing works against this by having a water separator. In it, the water is collected and kept away from the outflowing compressed air.

Pressure Gauge and Pressure Regulator
When airbrushing, it is necessary to be able to adjust the pressure exactly within a slender range between 1.5 and three bar. For this, you want a pressure regulator and a pressure gauge. The latter shows you exactly the pressure you are using. A nice spray pattern can only be achieved if the pressure can be adjusted in detail.


Air Tank
The advantage of an air tank is clearly the volume reduction and the more fixed working pressure. When the compressor is switched on, the air is compressed once after which stored in the air tank. The compressor can then switch off (works silently) and the pressure is taken from the air tank. Only when the pressure within the air tank drops, the compressor motor starts working once more and refills the tank. The air tank allows longer working with a more constant pressure in a low-noise environment.

For more information regarding airbrushing site have a look at the web page.